Installing Jiose J500BT Driver on Windows

Created by Jiose Printer, Modified on Thu, 19 May, 2022 at 5:29 PM by Jiose Printer

Jiose J500 Label Printer Driver Installation for Windows 

Insert the U disk that came with the package, and open the 

Windows Setup folder to install the driver (or visit our website 

https://www.jioseprinter.com to get it) >>> 

Note 

Make sure the label printer is connected to your computer 

with the USB cable and turn ON ((I=ON) before installation. 


Then, unzip the driver files 

Double click the extracted files of the driver,




Please click "Yes" to allow the installation



Click it to install 

The Port will be filled out by USB001 automatically >>> (maybe USB002,USB003,...) 

Automatically filled out 

If the printer is not connected, your computer would not identify the port when clicking the "Detect USB Port", 


At this time, you need to connect the printer to 

your computer with the USB cable and turn it ON. 


After the printer is connected and the Feed Button lighted, click "Detect USB Port" again >>> And, it will show "Detected USB Port" normally 


Then, the page will display "Add Printer Successfully!" 

OK, the driver installation is finished




Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article