Initial Unbox and Assemble for Jiose J500BT Printer

Just simply follow the steps below. 

1.  Make sure that the Printer is OFF; (If you plug in the power cord with the power switch on, it may                                                               affect the printer's lifespan.)

2.  Attach the power cord to the adapter, Connect the power adapter cable to the printer;

3.  Connect the USB cable;

4.  Turn on the power;

5.  Adjust the guide rail;

6.  Insert the label along the guide rail, the printer will automatically roll the first label back and forth once to identify and catch the label and position it at the tear-off point once it’s done;

7.  Press and hold the blue button for about 4 seconds until you hear two beep sounds, the printer will run a machine print test;

8.  You may set up the printer on your [Windows] [MacOS] [ChromeOS] computer / [Android] [iPhone] cellphone once the test page is clear.