Initial Unbox and Assemble for Jiose J500 Printer

Created by Jiose Printer, Modified on Thu, 14 Sep, 2023 at 5:09 PM by Jiose Printer

Caution: DO NOT unplug the power cable while the power switch is on. 
    Otherwise, it may affect the future usage of your printer.


Just simply follow the steps below. 

  1.  Make sure that the Printer is OFF; (If you plug in the power cord with the power switch on, it may                                                               affect the printer's lifespan.)

  2.  Attach the power cord to the adapter, Connect the power adapter cable to the printer;

  3.  Connect the USB cable;

  4.  Turn on the power;

  5.  Adjust the guide rail;

  6.  Insert the label along the guide rail, the printer will automatically roll the first label back and forth once to identify and catch the label and position it at the tear-off point once it’s done;

  7.  Press and hold the blue button for about 4 seconds until you hear two beep sounds, the printer will run a machine print test;

  8.  You may set up the printer on your [Windows] [MacOS] [ChromeOScomputer once the test page is clear.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article